4.3 RECOMMENDED MINIMUM BASIC TOOL PACKAGE FOR 5-7 MAN STEEL BUILDING ERECTION CREWS

HAND TOOLS QUANTITY

General steel belts with bolt bags bridge reamer, 9/16”, 11/16”, 13/16”, 15/16” broom push brush, paint, misc. brush, wire bucket“C” clamps (6”, 9” and 12”) cable, 1/2” diameter cable clamps can, 5 gal gasoline wlsafety spout can, oil caulking gun, open barrel chain, 35’ long (to lock equipment) chalk line, 100’ long and chalk channel locks chokers (or as required).

1/2” cable, 6’ long, eyes both ends 5/8” cable, 6’ long, eyes both ends 1/2” cable, 1O’-14’ long, eyes both ends

Circuit tester, cold chisel, come-a-long, 3 ton come-a-long, 1 ton dolly drift pin (barrel pin, bull pin) extension cord, #10-3, 2/4 way box, 250’ long extension cord, #12-3, 100’ long extension cord, #12-3, 25’ long fire extinguisher, #10 files, assorted first aid kit, flashlight, gloves, pr.goggles, cutting goggles, safety ground fault interrupter (circuit breaker), hammers

Carpenters claw
Ball peen
Sledge
Rubber
Welder’s Chipping
Handlines (rope), 1/2”-5/8” dia., 60’ long wlhooks
Hard hats
Knife
pocket Knife
putty
Ladders
Extension, 20’ to 40’ long

Step, 6’ to 8’ long level rod load binders mop, sponge padlocks pliers, side cutter plumb bob, pop rivet gun (manual or electric), punch, center safety harnesses, safety harness tie-off, rigging safety netting salt tablets saws, carpenters, hand saws, hack w/blade, saw horses, scaffold - section w/ wheelsScrewdriver, sets, flat and Phillips Screwdriver, 10 Pc. set, 1/4” hex drive shear, portable panel shovels slings, nylon, 4” wide, 10, - 12’ long snips,aviation (2 R/H, 2 L/H, straight cut) snips, large (bulldogs) spirit level 4’ , long sponges spreader, 1 set 3/4” dia., 20’,center eye w/ hook ends staple gun and staples, square, framing square, try tape measure -12’ to 16’ long tape measure -100, long tool box, transit turnbuckles - 3/4” min., vice grips, sheet metal vice grips, standard vise grips, welding clamp.

 


 

Steel Building Erection Manual