Accessories for General Steel Buildings

We have many different accessories you can add to your steel building to enhance its beauty, as well as add to functionality:

• Glass storefront with partial brick front and purlin extension
• Atrium and brick front
• Canvas canopies
• Stucco dormers
• Decorative brick with purlin extension
• Standing seam roof
• Steel entrance canopies

Basic Accessories For General Steel Buildings

Doors:

Overhead Doors: We offer three basic types of doors: Sectional doors, Roll-up and Sliding. Your General Steel service representative can give you more details.

Walk Doors:

Walk doors are offered in a 3' x 7' and 4' x 7' single swing, or 6' x 7' double swing with 1.75" thick door leaves. The doors have all the needed hardware and come available with optional weather stripping, door closer, and other special hardware items. Door leaves may be solid or furnished with narrow-lite or half glass panels. Doors are available either insulated or non-insulated.

Insulation:

You can get insulation that is specifically designed to be used in steel building roofs and walls to satisfy thermal requirements needed. In most installations this would range from R-10 to R-39.

Windows:

Horizontal slide windows:
Aluminum horizontal sliding windows provide light and ventilation, and are virtually maintenance free. Included are half-screen, latch and weather stripping.

Slim line windows:
Slim line design windows are available for use in any steel building to provide a more tailored and aesthetically pleasing appearance. Windows are available either insulated or non-insulated utilizing solar gray glass.

Wall Louvers:
Wall louvers are available in 3' x 3', 4' x 3' and 3' x 4' sizes. They may be either fixed or adjustable and have an overlapping design to insure weather tightness.

Framed openings:
Steel-framed openings are available to provide framing and support for wall accessory items not supplied.

Translucent Skylights:
Our translucent fiberglass skylights have the same profile as our roof and wall panels. They allow natural lighting into your steel building. Translucent skylights are available with UL class 90 wind uplift rating.

Ridge and Circular Ventilators:
Stocked in 10' lengths for single or continuous ridge installation, ridge ventilators with standard 9" or 12" throat openings are furnished complete with bird screens. A 12" x 1'-11" ultra ridge vent and both 20" and 24" diameter circular ridge vents including bird screens are also offered. All ridge ventilators are available with optional dampers, cable operators, and operator handles.

Gutters:
Roll-formed 26 gauge finished steel are available in lengths of up to 30'. We miter all the corners and one end is sw edged for easy erection.

Downspouts:
Downspouts come available in 4" x 5" or 3" x 4" roll-formed steel. They are colored to match the wall panel. They come in lengths of 10" with sw edged ends and are sized to match the gutter capacity.

Steel Building Accessories Specifications>>